This article describes how to replace the screen protector on your G6 device.
The G6 screen protector (ACC-G6-SP) helps prevent superficial scratches and cracks. It also reduces glare, making the screen easier to read in bright environments.
To replace G6’s screen protector
- Pry up a corner of the damaged screen protector and gently pull to remove it.
NOTE: Start with a loose corner if possible. Use your fingernail or a wooden toothpick to avoid damaging the screen.
- Clean G6’s screen with a clean, lint-free, and dye-free microfiber cloth and screen cleaner.
IMPORTANT: Use an alcohol and ammonia- free cleaning solution to avoid damaging G6’s screen.
- Peel the film from the sticky side of the new screen protector.
- Align the new screen protector with the edges of G6’s screen.
- Place the screen protector on G6’s screen, starting on one side and slowly moving across it.
- Smooth out any air bubbles between the screen and protector using the included installation card. Start at the center of the screen and push bubbles out toward the edges.